WELDING CONSULTANCY SERVICES

Our Welding Consultancy Unit offers a comprehensive range of services aimed at providing total quality solutions to the fabrication, construction and welding industries.

  • What We Do
  • Third Party Inspection (Welding)
  • Weld Consult / Trouble Shooting

​When it comes to providing customers with complete welding consultancy services to help them with projects of any type, AIT has more expertise than anyone. Our fully trained and experienced welding consultants can help you with virtually anything related to the welding process, regardless of your needs.



Our welding consultants have extensive experience with a wide array of materials, ranging from steel and aluminum to titanium and niobium. We can assist you with practically every area of welding, from preparation of materials to troubleshooting. When you work with Meyer Tool for welding consultation services, you receive the benefit of partnering with some of the most knowledgeable experts in the industry.

Our Welding Consultancy Unit offers a comprehensive range of services aimed at providing total quality solutions to the fabrication, construction and welding industries.

AIT has qualified and certified personnel capable of providing total quality solutions to the fabrication, construction and welding industries. The objective of this service is to provide a consultancy service to the welding and fabrication industry using qualified welding engineers. These services include but not limited to the following;

    • Welding Inspection
    • Preparation and Approval of WPS & PQR
    • Preparation and Approval of Welder Qualification
    • Distortion Control
    • Welding Procedure Witnessing
    • Failure Analysis & Accident Investigation
      • Analysis of Welding Problems and Weld Failures
      • Welding Process, Materials & Consumable Selection

AIT perform fabrication inspection and verification of the manufacturing process.

Materials and components are observed at key points during the manufacturing process in fabrication facilities. AIT Certified Inspectors and Welding Engineers also witness welder and welding procedure qualification tests as applicable to the scope of the project.


AIT can serve as the Clients representative, performing duties such as:

  • Conducting vendor audits, to evaluate a fabricator’s own quality management program, material handling, welding procedures, etc.
  • Performing third party inspections, throughout the fabrication process, including:
    • Monitoring of processes
    • Pre-fabrication Inspections
    • In-process hold-point Inspections
    • Final Inspections/Functional Acceptance Tests (FATs)
    • Witnessing of hydrostatic and pneumatic pressure testing
    • Detecting deviations from specification as early as possible in the manufacturing process.
    • Monitor compliance with standards, procedures and specifications.
    • Provide weekly reporting, and ensure Ares of Concern are brought to the client’s attention.
  • Performing the above tasks, for repairs and alterations of existing facilities.

 



AIT is dedicated to helping industry enhance productivity, product quality and cost-effectiveness by offering expert advice in welding technology. Consider AIT when you need to call on an experience outside consulting service as a resource for trouble-shooting and weld process optimization.



AIT provides expert advisement on a broad range of welding codes and standards and can help to develop welder/procedure qualification testing programs as well as weld procedures. This includes advisement on weld process selection and optimization and specification development.

Another typical consulting engagement involves product evaluation. AIT can establish functional and visual weld performance requirements.

AIT conducts pre-audit and drawing reviews as well as develops quality assurance and quality control programs.

When welds fail, call AIT on 084-360872, 08033418041 or email consult@aitcnigeria.com to trouble shoot the weld and supply failure analysis.




PROFESSIONAL WELDING SERVICES

AiT has qualified and certified personnel capable of providing total quality solutions to the fabrication, construction and welding industries. The objective of this service is to provide a consultancy service to the welding and fabrication industry using qualified welding engineers.

Welding Inspection

The objective of this service is to carry out visual inspection of weld fit ups and complete welds, dimensional checks, witnessing of welds or non-destructive testing to confirm conformity of the fabrication with the purchase specifications, the applicable drawings, codes and standards. The level of involvement can either be established by the welding Engineer or advice by the client.

Welder performance Approval

The service provides certification of welders against the requirements of ASME IX, API-1104, AWS D1.1 and other national standards. It includes onsite invigilation of the test Piece against written procedures, witness destructive testing and certification of the welder. Prolongation of the welder approval can also be provided.

Welding Procedure Qualification

This service proves the certification of weld procedures against the requirements of ASME IX,API-1104,AWS D1.1 and other national and international standards. It includes on site invigilation of the test piece against written procedures, witness destructive testing of the piece, review of the destructive testing results, and certification of the weld procedure.

WELDING TRAINING MANUALS

Downloads

AIT provides expert advisement on a broad range of welding codes and standards and can help to develop welder/procedure qualification testing programs as well as weld procedures. This includes advisement on weld process selection and optimization and specification development.

PORT-HARCOURT

Nigeria

We are positioned to respond to our clients call with ease and clarity.
(+234)-803-341-8041

www.aitcnigeria.com

info@aitcnigeria.com

GET IN TOUCH

Our Social Media

Ours is an assemblage of the best hands in the NDT and Inspection industry…